OKI 5300 Plus Manual De Usuario

Descargar
Página de 109
Customizing
61
DIAL TONE DETECT:
  This function allows your OKIFAX
to wait for and detect a dial tone before pro-
ceeding with dialing. Available settings are ON
and OFF.  Default: OFF.
BUSY TONE DETECT:
 This function allows your OKIFAX to
detect a busy tone when sending a fax. Available
settings are ON and OFF. Default: ON.
MF(TONE)/DP (PULSE): 
This function sets the dialing
method. Use the MF setting for Touch-Tone dialing,
or the DP setting for pulse dialing. Default: MF
(TONE).
PBX LINE:
 Turn this function on if your OKIFAX is con-
nected to a PBX (Private Branch Exchange—a phone
system used to route internal calls). Once this func-
tion has been turned on and the access digit function
has been programmed using the Dial Prefix param-
eter (below), your OKIFAX recognizes the access
digit you use in your PBX to get an outside line.See
the Dial Prefix function below for mor information.
Available settings are ON and OFF. Default: OFF.
See “Connecting to a PBX,” page 26, for instructions on
changing this setting.
AUTO START:
 When this function is turned on, your
OKIFAX automatically dials as soon as you press a
One Touch key or enter an Auto Dial code—you do
not have to press Start. Available settings are ON and
OFF. Default: ON.
DIAL PREFIX:
 If your OKIFAX is connected to a PBX, use
this function to specify the access digit used to obtain
an outside line from your PBX. You can enter a number
with up to four digits. When this parameter is
programmed, the OKIFAX recognizes the access digit
when you enter a number and automatically pauses for
an outside line before dialing the rest of the number.
See “Connecting to a PBX,” page 26, for instructions on
changing this setting. Available settings are ON and
OFF. Default: OFF.
Changing Your Dial Parameter Settings
1
Press the Select Function key.
2
Press the 9/User Program One Touch key.
3
On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4
Press the Yes 
§ key until the display shows the dial
parameter you want to change.
5
Repeatedly press the No 
©
 key until the setting you
want appears in the display.
6
Press the Yes 
§ key to confirm your selection. The
name of the next dial parameter setting appears in the
display.
7
Press the Select Function key to finish.