Samsung ML-7300 Manual De Usuario
P
RINTER
O
PTIONS
F.6
4
Hold the memory option with the
connection points pointing toward
the connector and position the
notch as shown. Insert the
memory option all the way into
the connector at a 30
connection points pointing toward
the connector and position the
notch as shown. Insert the
memory option all the way into
the connector at a 30
O
angle, and rotate it left until it
snaps into place.
snaps into place.
5
Make sure both metal clips on the
connector are fastened, and the
two pins on each of the
connectors are pushed through
the holes on the memory option.
connector are fastened, and the
two pins on each of the
connectors are pushed through
the holes on the memory option.
6
Continue with ‘Closing the Printer
Cover’ on page F.3.
Cover’ on page F.3.
7
Set the printer memory item on
the printer tab of the properties
dialogue box to the value of the
added printer memory.
the printer tab of the properties
dialogue box to the value of the
added printer memory.
Notch
Connection points
Printer Memory
3
Unpack the memory option.
Notes:
Avoid touching the connection
points along the edge.
Save the packaging.
points along the edge.
Save the packaging.