Samsung ML-7300 Manual De Usuario
14
Set the IP address of the WINDOWS pc running SyncThru
in step1. For example, if the IP address is 155.213.211.12,
follow these steps:
in step1. For example, if the IP address is 155.213.211.12,
follow these steps:
a
Press Item until SV-IP B1 appears on the display.
b
Press Value until 155 appears on the display.
c
Press Enter/Cancel.
d
Press Item until SV-IP B2 appears on the display.
e
Press Value until 213 appears on the display.
f
Press Enter/Cancel.
g
Press Item until SV-IP B3 appears on the display.
h
Press Value until 211 appears on the display.
i
Press Enter/Cancel.
j
Press Item until SV-IP B4 appears on the display.
k
Press Value until 12 appears on the display.
l
Press Enter/Cancel.
15
Reset printer and the firmware will be upgraded.
NETWORK MENU
Notes
:
After the ”Completed. Network Card will start about 30secs
later” message is displayed on SyncThru, click OK.
It may take a few seconds to write the new file to Firmware.
Normally 30 seconds is sufficient.
U
SING
O
PERATOR
P
ANEL
3.27