Epson 1440 Manual De Usuario

Section 5: Setting Up Windows Workstations

AXIS 1440 User’s Manual

Using the Microsoft

LPD Monitor with

Windows NT 4.0

This section describes how to use the built-in Microsoft

LPD

Monitor to set up a Windows NT 4.0 server for LPR printing over the
TCP/IP protocol.

Before You Begin

Before you begin this procedure, configure the AXIS 1440 for
TCP/IP, as described in Configuring the Print Server for TCP/IP on
page 23.

Preparing for

LPR/LPD printing

Follow these steps to prepare for LPR/LPD printing:

1. Open the Control Panel and click the Network icon to verify that

TCP/IP printing appears in the list of installed components. If
TCP/IP is already installed, skip to Installing a printer below.

2. Select Protocols and add TCP/IP Protocol.

3. Select Services and add Microsoft TCP/IP Printing.

Installing a printer

Follow these steps to install a printer for LPD printing:

1. Click Start, point to Settings, then click Printers.

2. Right-click your

EPSON

printer icon and select Properties.

3. Click the Ports tab, then select Add Port.

4. Select LPR Port and click New Port.

5. In Add LPR compatible printer, enter the name or Internet

address of the AXIS 1440 as the print server to provide LPD.

6. Enter ’LPT1’ as the name of the printer or print queue on that

server.

7. Click the Sharing tab, then select Shared to share the printer over

the network.

8. Enter the name you want to use for the shared printer.

9. Click the Security tab to select security settings on the printer.

10. Click OK to save your settings.