Epson 1440 Manual De Usuario
Section 10 Updating the Software
76
AXIS 1440 User’s Manual
Upgrading the Software
You can upgrade the AXIS 1440 flash memory using either of the
following:
following:
•
AXIS NetPilot (for networks supporting IPX/SPX).
•
FTP (for networks supporting TCP/IP).
Contact your
EPSON
dealer if the above methods fail, or call
EPSON
at (310) 782-2600 (U.S.) or (905) 709-9475 (Canada) 6
AM
to 6
PM
,
Pacific Time, Monday through Friday. The AXIS NetPilot and FTP
upgrade procedures are described on the following pages.
upgrade procedures are described on the following pages.
Upgrading Using
AXIS NetPilot
This method is recommended for upgrading flash memory in
NetWare networks. An Upgrade Wizard is available to guide you
through the necessary procedures. Just click the Upgrade icon on the
AXIS NetPilot toolbar to display the Upgrade Wizard menu.
NetWare networks. An Upgrade Wizard is available to guide you
through the necessary procedures. Just click the Upgrade icon on the
AXIS NetPilot toolbar to display the Upgrade Wizard menu.
To ensure that the upgrade goes smoothly, put the file with the new
software in the Upgrade folder. This folder, which was created when
AXIS NetPilot was installed, resides in the same folder as AXIS
NetPilot.
software in the Upgrade folder. This folder, which was created when
AXIS NetPilot was installed, resides in the same folder as AXIS
NetPilot.
Upgrading Over the
Network Using FTP
Network Using FTP
To upgrade over the network using FTP, you need the file with the
new print server software. The name of this file is in the form
new print server software. The name of this file is in the form
product_version.bin
, (for example,
1440_551.bin
for software
release 5.51). You can obtain this file from the
EPSON
Home Page or
FTP site on the Internet.
The AXIS 1440 must be installed and configured for TCP/IP as
described in Configuring the Print Server for TCP/IP on page 23.
described in Configuring the Print Server for TCP/IP on page 23.