Epson 1440 Manual De Usuario
Appendix B: The Parameter List
AXIS 1440 User’s Manual
81
Appendix B The Parameter List
This appendix provides an overview of the AXIS 1440 parameters.
The Config File
The left-hand column of this table shows the parameters and their
default values as they appear in the config file, and the right-hand
column contains a brief description of each parameter.
default values as they appear in the config file, and the right-hand
column contains a brief description of each parameter.
After you change them, most parameters take effect for the next print
job. If Requires Restart appears in the parameter description, you must
restart the AXIS 1440 before a change to that parameter takes effect.
job. If Requires Restart appears in the parameter description, you must
restart the AXIS 1440 before a change to that parameter takes effect.
Note:
The Root Password parameter (ROOT_PWD) only appears when
you’re logged in to the AXIS 1440 using root. It does not print when
you press the test button.
you’re logged in to the AXIS 1440 using root. It does not print when
you press the test button.
--- GENERAL MENU
NODE_ADDR.
: 00 40 8C 10 00 86
Node Address
BASE URL.
: WWW.AXIS.COM
Default Base URL Address
ROOT_PWD.
: pass
Root Password
HP_JETADMIN.
: AUTO_SENSE (AUTO_SENSE, YES, NO)
HP JetAdmin Support Enabled
--- TCP/IP MENU
TCP_ENB.
: YES
TCP/IP Protocol Enabled
INT_ADDR.
: 0 0 0 0
Internet Address
DEF_ROUT.
: 0 0 0 0
Default Router Address (0.0.0.0 for no router)
NET_MASK.
: 0 0 0 0
Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
LPD_BANN.
: OFF
LPD Banner Page Disabled
DHCP_ENB.
: YES
DHCP Protocol Enabled
BOOTP_ENB.
: YES
BOOTP Protocol Enabled
RARP_ENB.
: YES
RARP Protocol Enabled
WINS_ENB.
: YES
WINS Protocol Enabled
WINS_ADDR1.
: 0 0 0 0
Internet Address of the primary WINS server
WINS_ADDR2.
: 0 0 0 0
Internet Address of the secondaryWINS server
NBT_SCOPE_ID. :
Defines the NetBIOS scope to be used with WINS Name Registration