Compaq 5200 Manual De Usuario

ENWW

Alerts

From the Alerts screen, IT administrators can set up the product to send problem and status 
alerts to anyone through e-mail messages. When this function is configured, alerts are 
automatically triggered about supplies and paper-path status, as well as for service and advisory 
information. More than one individual can receive alerts, with each person receiving only specific 
alerts. For example, an administrative assistant might be responsible for ordering toner or fixing 
jams, and could receive advanced warning when toner is low or a jam occurs. Similarly, the long-
life supplies might be handled by an external service provider, who could receive alerts about 
performing product maintenance, loading the front or rear stapler, and similar needs.

With a permanent storage device installed, such as a hard disk, you can create up to four 
different destination lists, with up to 20 recipients on each list. (Without the permanent storage 
device, you can send alerts to only four e-mail addresses.) The following example is for a 
product that has a permanent storage device installed. If a permanent storage device is installed, 
you can edit, test, and delete destinations and destination lists.

The following illustration, table, and procedures describe how to use this screen.

In order for alerts to function, outgoing e-mail must be enabled. To enable outgoing mail, see 

.

Note:

 See the table on the 

following page for 
descriptions of the callouts 
in this illustration.