Cognitive Solutions B780 Manual De Usuario

A776 (B780) Programming Guide 

A776-PG00001 C 12/09

When the monochrome paper type command (00) is set, this command is recognized and retained but has no effect. 
The monochrome paper selection (usually black) controls the output.

When two-color paper is loaded and the two-color paper type command set, this command will designate which of 
the two colors will be used for everything not specified as having (an) explicit color parameter(s) such as color logos, 
side bars, surround graphics, background watermarks or color raster graphics. 

After a power loss or reset the default value m=0 is reset. 

FS 

Hexadecimal  1C 

Decimal 

28

Selects the slip station for printing or MICR. This command must be disabled via 1F 03 38 00 to 
use the 1C 70 / 1C 71 logo command sequences. 

GS V m 

 

GS V m n 

Hexadecimal  1D 56 m 

 

1D 56 m n 

Decimal 

29 86 m 

 

29 86 m n

Selects the mode as shown in the table.

Determines cutting position only if m is 65 or 66.

1, 49  Partial cut (no extra feed).

65 

Feeds paper to cutting position + (n times vertical  

 

motion unit), and cuts the paper.

66 

Feeds paper to cutting position + (n times vertical  

 

motion unit), and performs a partial cut.

0, 48; 1, 49; 65, 66 (when used with n)

Range of n: 

0 – 255

Default of m, n: 0

Selects a mode for cutting paper and cuts the paper. There are two formats for this command, one requiring one 
parameter m, the other requiring two parameters m and n. The format is indicated by the parameter m.

n times the vertical motion unit is used to determine the cutting position to which the paper is fed.

If m is out of the specified range, the command is ignored.

®

GS 0x81 m n 

Hexadecimal  1D 81 m n 

Decimal 

29 129 m n

Value of m: 

0 =  monochrome (black) paper (Kanzaki P-310)

1 =  Two-color (red/black) papers (Kanzaki P-310RB)