Garmin EX21 Manual De Usuario

Maintaining the Projector

Replacing the Lamp

The life span of the projection lamp is about 3000 hours if

Brightness

Control

in the Settings menu is set to

High

(default), and

4000 hours if

Brightness

Control

is set to

Low

. See page 63 to check

the lamp usage.

It is time to replace the lamp when:

■

The projected image gets darker or starts to deteriorate.

■

The message

Replace the lamp

appears on the screen and the

Lamp

light flashes orange. To maintain projector brightness

and image quality, replace the lamp as soon as possible.

You may also need to replace the lamp if the

Lamp

light flashes or

stays on red. See page 69.

Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L41.

Follow these steps to replace the lamp:

1. Turn off the projector and, after the projector beeps twice, unplug

the power cord.

2. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

note

Turn off this product when
not in use to prolong the life
of the projector.

Lamp light

warning

Let the lamp cool fully
before replacing it.

In the unlikely event that
the lamp has broken, small
glass fragments may be
present and should be
removed carefully to avoid
injury. If the projector has
been installed on the ceiling,
you should stand to the side
of the lamp cover, not
underneath it.

If the lamp is used after the
replacement period has
passed, the possibility that
the lamp may break
increases. When a lamp
replacement message
appears, replace the lamp
with a new one as soon as
possible, even if it is still
working.