Pitney Bowes B700 Manual De Usuario

a.

If you want to accept the default value displayed by the meter, press 

 and go

to step d. To enter a different postage value, go to step b.

b.

Use the number keys to type in the postage value you want.  For example, to key in
64¢, press:

You don’t have to type a decimal point. The meter automatically adds it.

c.

Press 

 to confirm the postage value. The three bars on either side of the postage

display tell you the meter is ready to print postage as shown below.

d. Place your envelope on the transport 

 and push it against the rear wall of the

meter. Slide the envelope to the right until its lead edge touches the  trip mark on the
feed deck. See the figure at the bottom of the previous page.

e.

The meter senses the presence of your envelope, then conveys it into the print area
and out to the stacker.

f.

You can insert the next envelope as soon as the previous one enters the stacker.

The Quick Reference Guide in-
cluded with your documentation
package provides brief step-by-step
instructions for the procedures you’ll
use most often. Place the guide in
the cassette compartment as shown
in the accompanying figure.

B700 Installation 8/18 REV A

05/13/97, 1:17 PM

9