Casio XJM245 Manual De Usuario

COMPUTER 
Terminal

R C

N Single

Use this sub-menu to specify manually the type of signal being input 
from the projector’s COMPUTER IN terminal.

*:

Automatically detects the signal being input from the 
COMPUTER IN terminal and configures the appropriate input 
protocol.

Select this option when a computer is connected to the 
COMPUTER IN terminal. For details about connecting a 
computer, see “Connecting a Computer to the Projector” in the 
“Setup Guide”.

Select this setting when the projector’s COMPUTER IN terminal is 
connected to the component video output terminal of a video 
device using a commercially available component video cable. 
For information about connection, see “Connecting to a Video 
Device” (page 43).

Note

The setting of this item cannot be changed while the projector 
is in the 3D input mode. See “3D Input Mode” on page 10 for 
information.

Video Signal / 
S-Video Signal

V

N Single

Use this sub-menu to specify manually the type of signal being input 
from the projector’s VIDEO terminal or S-VIDEO terminal.

*:

Select this setting to have the projector switch the video signal 
system automatically in accordance with the input signal from the 
video device that is connected to the VIDEO terminal or S-VIDEO 
terminal.

Each setting selects the applicable video system. Use these 
settings when you want to specify only one specific video signal 
for the VIDEO terminal or S-VIDEO terminal.

Signal Name 
Indicator

R C V H D U N Single

Use this sub-menu to specify whether or not the name of the 
currently selected signal source should be displayed in the 
projected image.

*:

Select this option to turn on display of the name of the currently 
selected signal source in the projected image.

Select this option to turn off display of the signal source name.

Restore Menu 
Defaults

R C V H D U N Source 

Specific

Use this sub-menu to return all of the sub-menu items on the Input 
Settings main menu to their initial default settings.
z Restoring menu defaults when there is no input signal will restore 

defaults for the currently selected input source.

z Note that the “Signal Name Indicator” setting is always returned 

to its initial default, regardless of the currently selected input 
source.