Sharp PG-F211X Manual De Usuario
32
Operating with the Remote Control
Displaying and Setting the
Break Timer
Break Timer
Press BREAK TIMER.
• The timer starts to count down from 5
minutes.
1
2
Press P /R /O /Q to adjust the
length of the break time.
• Increases with P or Q
length of the break time.
• Increases with P or Q
5 minutes s 6 minutes s 60 minutes
• Shortens with O or R
4 minutes s 3 minutes s1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
On-screen display
Canceling the break timer display function
Press BREAK TIMER.
• Break Timer does not function while the pro-
jector is operating the “Auto Sync”, “FREEZE”
or “AV MUTE” functions.
or “AV MUTE” functions.
Note
POINTER button
ECO+QUIET button
Adjustment buttons
(P/R/O/Q)
(P/R/O/Q)
BREAK TIMER button
SPOT button
Switching the Eco+Quiet
Mode
Mode
Press ECO+QUIET on the remote con-
trol or on the projector to switch the
Eco+Quiet mode between on and off.
trol or on the projector to switch the
Eco+Quiet mode between on and off.
• When the Eco+Quiet Mode is set to “ON”, the
sound of the cooling fan will turn down, the
power consumption will decrease, and the lamp
life will extend.
power consumption will decrease, and the lamp
life will extend.
Press POINTER and press P/R/
O/Q on the remote control to move
the pointer.
O/Q on the remote control to move
the pointer.
Displaying the Pointer
Press SPOT and press P/R/O/Q
on the remote control to move the
spot area.
on the remote control to move the
spot area.
Using the Spot Function
1
Press POINTER again.
• The pointer will disappear.
2
1
Press SPOT again.
• The spot area will disappear.
2
tails of the Eco+Quiet mode.
Note