Canon SX7 MARKII Manual De Usuario

2

Install the projector.

z

Install the projector at the desired distance from the screen.

Connect the projector.

z

Connect the projector and the computer with a cable.

Turn on the projector.

z

Connect the power cord and turn on the projector.

z

Adjust the height of the projecting image (P43).

z

Select a display language when turning on the projector for the first time (P41).

Press the 

 button twice.

z

Adjust the focus of the screen.

Set up the computer.

z

Turn on the computer and set the resolution.

Select the input signal by pressing the 

 button.

z

Select an appropriate input signal in accord with the signal from the computer.

Press the 

 button twice again.

z

Adjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.

Press the 

 button.

z

Optimize the input signal with the auto PC function (Skip this step if the projector
is projecting an image properly.)

Select the image mode with the 

 button.

z

Select an appropriate image mode for projection.

z

Specify the aspect ratio or display area in the [Aspect] menu as required (P57,
90).

Start the presentation.

z

Set the useful functions available during the presentation from the remote control.

Turn off the projector

z

Turn off the projector and unplug the power cord.

Finishing the projection...