Viewsonic PJ650/PJ520 Manual De Usuario

1 Press the MAGNIFY (ON) button

The projector enters MAGNIFY mode.

2 Press the POSITION button, then use the 

, , , 

buttons to 

select the area to enlarge and then press the POSITION button again to confirm 
your selection.

3 Press the 

,

 buttons to zoom in and out of the selected area.

Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore the screen to normal. (The 
projector will also automatically exit MAGNIFY mode if there is a change in the input signal's state.)

NOTE:
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT 
or VIDEO feature is used, or if there is a change in the input signal's state.

1 Press the FREEZE button

The icon appears and the screen will freeze at the current image. Press the FREEZE button again and the 
appears as the projector exits FREEZE MODE.

NOTE:
•

The projector will automatically exit FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, 
BLANK ON/OFF, or MENU ON/OFF feature is used, or if there is a change in the input signal's state.

•

If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE 
mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for 
too long.