Epson EB-84L Manual De Usuario

q

The  following  screen  showing  the  status  of  image  signals  is  displayed
when  only  the  image  that  the  projector  is  currently  displaying  is
available,  or  when  no  image  signal  can  be  found.  You  can  select  the
input   port   where   the   equipment   you   want   to   use   is   connected.   If   no
operation  is  performed  after  about  10  seconds,  the  screen  closes.

USB  is  only  displayed  for  EB-826WH/825H/824H/85H.
LAN  is  only  displayed  for  EB-826WH/825H/85H.

You  can  change  directly  to  the  target  image  by  pressing  the  following
buttons  on  the  Remote  Control.

Remote Control

A

Each time the button is pressed, the image changes between the Computer1
and the Computer2 input port.

B

Each time the button is pressed, the image changes between the Video and
the S-Video input port.

C

Each time the button is pressed, it changes to the image from equipment
connected to USB Display/USB (TypeA) Port. Only changes to USB Display
when using the EB-84.

D

Changes to the image projected with EasyMP Network Projection. When
projecting via Quick Wireless Connection using the optional Quick
Wireless Connection USB Key, this button switches to that image.
(EB-826WH/825H/85H only)
When using EB-824H/84H/84L, this does not function even if the button is
pressed.