Epson EB-84L Manual De Usuario

Settings  are  enabled  when  the  optional  Wireless  LAN  unit  is  installed.

Sub Menu

Function

Wireless LAN Power

Turn On when connecting the projector to the computer over wireless LAN.
If you do not want to connect via wireless LAN, turn it Off to prevent unauthorized access by others. This is set to On by default.

Connection Mode

When the projector is connected to a computer with EasyMP Network Projection, set so that it is in a permanently connected mode.
Set to Quick Connection Mode when you want to make a quick wireless connection. Set to Advanced Connection Mode when you want to connect to a
network system via an access point.

Wireless LAN Sys.

Sets the Wireless LAN system.

SSID

Enter an SSID. When an SSID is provided for the Wireless LAN system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.

IP Settings

You can make settings related to the following addresses.
DHCP

: Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses.

IP Address

: You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the

following IP Addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask

: You can input the Subnet Mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the

following Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address

: You can input the IP Address for the gateway for the projector. You can input a number from 0 to 255 in each field of the address.

However, the following Gateway Addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)