Cisco Systems AIRONET 1000 Manual De Usuario
2-4
Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide
OL-9403-04
Chapter 2 Installing the Access Point
Before Beginning the Installation
•
Do not mount the access point outside of buildings.
•
Do not mount the access points on building perimeter walls unless outside coverage is desired.
•
When mounting an access point in the corner of a right-angle hallway intersection, mount the access
point at a 45-degree angle to the two hallways (see
point at a 45-degree angle to the two hallways (see
). The access point internal antennas
are not omnidirectional and cover a larger area when mounted this way.
Figure 2-1
Mounting the Access Point in the Correct Direction
•
Ensure that the access point is on the same subnet as the primary, secondary, or tertiary controllers
or has a DHCP server on the subnet with a route to the controllers.
or has a DHCP server on the subnet with a route to the controllers.
Before Beginning the Installation
Before you begin the installation, review these sections to become familiar with the access point, the
mounting hardware, and the deployment procedure:
mounting hardware, and the deployment procedure:
•
•
•
•
135660