ZyXEL Communications P-2302R Manual De Usuario
P-2302R Series
3
2 Hardware Connections
1 LAN: Connect a computer or an Ethernet switch to this port with an Ethernet cable.
2 WAN: Connect a broadband modem or router to this port with an Ethernet cable.
3 LINE: (P-2302RL only). Use telephone wire to connect this port to the telephone jack. This is a FXO
2 WAN: Connect a broadband modem or router to this port with an Ethernet cable.
3 LINE: (P-2302RL only). Use telephone wire to connect this port to the telephone jack. This is a FXO
(Foreign Exchange Office) port.
4 Phone 1-2: Connect one or more analog telephones to these ports using telephone wire. These are FXS
(Foreign Exchange Station) ports.
5 POWER: Use the included power adaptor to connect this power socket to an appropriate power source
(see the User’s Guide for power adaptors by region).
The PWR/VoIP LED flashes during system startup and stays on after the system self-tests are successful. The
WAN and LAN LEDs turn on if the WAN and LAN ports are properly connected (they flash when sending or
receiving data).
WAN and LAN LEDs turn on if the WAN and LAN ports are properly connected (they flash when sending or
receiving data).