Black Box EncrypTight Enforcement Point (ETEP) Installation Guide Manual De Usuario

Installing the ET1000A

ETEP Installation Guide

41

Remove all product components from the shipping carton and compare the contents to the packing list. 
Keep all packaging in case it is necessary to return the unit. 

The ET1000A is packaged with the standard items listed below. Additional cables, country-specific power 
cords, SFPs, and other accessories can be ordered separately. A list of approved transceivers is included 
in the ETEP Release Note.

1 ET1000A chassis

●

Firmware and software is factory-installed on the unit. 

2 Accessory Kit 

●

Rack mount kit includes 2 mounting brackets, 4 large screws (#10-32), and 8 small black screws

●

(2) Power cables (US)

●

(1) 6 ft. shielded DB-9 null modem cable (female to male)

●

(1) 6 ft. shielded Category 5 straight through cable (STP) with RJ-45 connector 

●

CD containing user documentation and a backup copy of the ETEP software 

The ET1000A can be mounted in a standard 19-inch rack using the mounting kit, or simply placed on a 
rack shelf or solid surface. Before installing the ET1000A in a 19-inch rack, review the rack-mounting 
guidelines listed in 

To mount the ET1000A in a standard 19-inch equipment rack, have the following tools and materials 
available:

●

Two mounting brackets, supplied in the Accessory Kit

●

8 small black screws and (4) large #10-32 screws, supplied in the Accessory Kit

●

#1 Phillips and #2 Phillips screwdrivers (user-supplied)