Black Box EncrypTight Enforcement Point (ETEP) Installation Guide Manual De Usuario
ETEP Installation Guide
47
3
Initial Setup
This section includes the following topics:
Overview
The following steps are required for initial setup of the ETEP:
1 Log in through a serial link.
2 Configure the management port.
3 Set the date and time.
4 Enter the throughput license.
1 Log in through a serial link.
2 Configure the management port.
3 Set the date and time.
4 Enter the throughput license.
Logging In Through a Serial Link
Initial setup is performed through a serial link to the RS-232 port. The initial setup commands are
available to the Admin and Ops users. The procedures and examples in this chapter assume that the
Admin user is performing the setup tasks.
available to the Admin and Ops users. The procedures and examples in this chapter assume that the
Admin user is performing the setup tasks.