Black Box EncrypTight Enforcement Point (ETEP) Installation Guide Manual De Usuario

Maintenance

56

ETEP Installation Guide

Most ETEP models do not contain any field-replaceable parts. If you experience an appliance failure, 
contact Customer Support for a replacement ETEP and throughput license.

The ET1000A has field-replaceable power supplies. Contact Customer Support to obtain a replacement 
power supply in the event of a failure. See 

 for 

removal and installation instructions.

●

●

When replacing an ETEP with a spare, the replacement ETEP will run at full throughput for a grace 
period. During the grace period, contact customer support to report the RMA unit and to receive a new 
license for the replacement. Licenses are linked to the serial number of the ETEP on which they are 
installed. You cannot install a license intended for one ETEP on a different ETEP. 

Upon receipt of the new license, install it on the ETEP as described in 

.

The ET1000A comes with dual internal power supplies. In the event of a failure, each power supply can 
be removed and replaced in the field. 

To replace a power supply in the ET1000A:
1 Unplug both power supplies at the power source. 
2 On the rear panel, lift the power cord clip on the affected power supply, and then remove the power 

).