ZyXEL Communications VSG1432-B101 Series Manual De Usuario
Chapter 7 Wireless
VSG1432-B101 Series User’s Guide
105
7.5 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices must support WPS. See
having to configure security settings manually. Set up each WPS connection
between two devices. Both devices must support WPS. See
for more information about WPS.
Note: The ZyXEL Device applies the security settings of the SSID1 profile (see
). If you want to use the WPS feature, make sure you
have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.
Click Network Settings > Wireless > WPS. The following screen displays.
Select Enable and click Apply to activate the WPS function. Then you can
configure the WPS settings in this screen.
Select Enable and click Apply to activate the WPS function. Then you can
configure the WPS settings in this screen.
Figure 31 Network Settings > Wireless > WPS
The following table describes the labels in this screen.
Table 17 Network Settings > Wireless > WPS
LABEL
DESCRIPTION
Enable WPS
Select Enable to activate WPS on the ZyXEL Device.
Method 1
Use this section to set up a WPS wireless network using Push Button
Configuration (PBC).
Configuration (PBC).