ZyXEL Communications VSG1432-B101 Series Manual De Usuario

Chapter 9 Static Routing

VSG1432-B101 Series User’s Guide

Use this screen to view and configure the static route rules on the ZyXEL Device. 
Click Network Settings > Routing > Static Route to open the following screen.

Figure 50   Network Settings > Routing > Static Route

The following table describes the labels in this screen. 

Table 28   Network Settings > Routing > Static Route

Add new 
Static Route 
Entry

Click this to configure a new static route.

#

This is the index number of the entry.

Status

This field displays whether the static route is active or not. A yellow bulb 
signifies that this route is active. A gray bulb signifies that this route is 
not active.

Name

This is the name that describes or identifies this route. 

Destination IP This parameter specifies the IP network address of the final destination. 

Routing is always based on network number. 

Subnet Mask

This parameter specifies the IP network subnet mask of the final 
destination.

Gateway

This is the IP address of the gateway. The gateway is a router or switch 
on the same network segment as the device's LAN or WAN port. The 
gateway helps forward packets to their destinations.

Modify

Click the Edit icon to edit the static route on the ZyXEL Device.

Click the Delete icon to remove a static route from the ZyXEL Device. A 
window displays asking you to confirm that you want to delete the route.