ZyXEL Communications VSG1432-B101 Series Manual De Usuario

Chapter 4 Tutorials

VSG1432-B101 Series User’s Guide

use the notebook’s wireless client to search for the ZyXEL Device (see 

).

This section shows you how to set up a wireless network using WPS. It uses the 
ZyXEL Device as the AP and ZyXEL NWD210N as the wireless client which 
connects to the notebook. 

Note: The wireless client must be a WPS-aware device (for example, a WPS USB 

adapter or PCMCIA card).

There are two WPS methods to set up the wireless client settings:

• Push Button Configuration (PBC) - simply press a button. This is the easier 

of the two methods.

• PIN Configuration - configure a Personal Identification Number (PIN) on the 

ZyXEL Device. A wireless client must also use the same PIN in order to 

download the wireless network settings from the ZyXEL Device.

Make sure that your ZyXEL Device is turned on and your notebook is within the 
cover range of the wireless signal. 

Make sure that you have installed the wireless client driver and utility in your 
notebook.

In the wireless client utility, go to the WPS setting page. Enable WPS and press 
the WPS button (Start or WPS button).