ZyXEL Communications P-312 Manual De Usuario

To configure a PPTP client, you must configure the My Login and Password fields for a PPP connection and
the PPTP parameters for a PPTP connection.

After configuring the User Name and Password for PPP connection, press [SPACE BAR] in the
Encapsulation field in Menu 4 -Internet Access Setup to choose PPTP as your encapsulation option. This
brings up the following screen.

The following table contains instructions about the new fields when you choose PPTP in the Encapsulation
field in Menu 4.

Press the [SPACE BAR] and then press [ENTER] to

 

choose

PPTP. The encapsulation method influences your choices for
IP Address.

This value specifies the time in seconds that elapses before
the Prestige automatically disconnects from the PPTP server.

(default)

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft standard (RFC
2516) specifying how a personal computer (PC) interacts with a broadband modem (i.e. xDSL, cable,
wireless, etc.) connection.

Menu 4 - Internet Access Setup

        ISP's Name= ChangeMe
        Encapsulation= PPTP
          Service Type= N/A
          My Login= username

        My Password= ******
        Idle Timeout= 100

         IP Address Assignment= Dynamic

        IP Address= N/A
        IP Subnet Mask= N/A
        Gateway IP Address=N/A

         Network Address Translation= SUA Only

                  Press ENTER to Confirm or ESC to Cancel: