Cabletron Systems BRIM-WT1 Manual De Usuario
SYNC PORT LEDS
BRIM-WT1 USER’S GUIDE
Page 23
4.3
SYNC PORT LEDS
The following LEDs indicate the status of the SYNC port.
DSR (Data Set Ready)
•
On - Indicates that the DCE is ready to operate, or that the Force
DSR True field (refer to the WAN Physical Configuration screen) is
set to YES (On).
set to YES (On).
•
Off - A valid DSR is not being received from the DCE. Check the
cabling or check if the DCE is powered on.
CTS (Clear to Send)
•
On - Indicates that the DCE is ready to receive data from the
BRIM-WT1, or that the Force CTS True field (refer to the WAN
Physical Configuration screen) is set to YES (On).
Physical Configuration screen) is set to YES (On).
•
Off - A valid CTS is not being received from the DCE. Check the
cabling or check if the DCE is powered on.
LNK (Link)
•
On - Indicates that the BRIM-WT1 is receiving a valid clock from
the DCE.
•
Off - Indicates that the BRIM-WT1 is not receiving a valid clock
from the DCE. Check the cabling, check that the DCE is powered
on, or check that the clock source is set properly in the DCE.
on, or check that the clock source is set properly in the DCE.
TST (Test)
•
On - Indicates that the SYNC port is in test mode.
•
Off - Indicates that the SYNC port is in non-test mode.