Cabletron Systems 3Com Manual De Usuario

C

HAPTER

 6: C

ONFIGURING

 

THE

 AP U

SING

 

THE

 ASCII I

NTERFACE

To remove packet types from the Type Filtering list, do the following:

1 Select Set Type Filtering from the Main Menu.

1 Highlight the packet type by pressing up/down arrows.

2 Select Delete.

Set the type filters to forward or discard the types listed. To control the type 
filtering mode:

1 Select Set System Configuration from the Main Menu.

2 Select Type Filtering.

3 Press space bar to toggle between the Forward, Discard or Disable type filtering.

4 Press Enter to confirm your choice.

5 Select Save ALL APs [F2] to save the Type Filtering Setup information to all APs 

with the same WLAN Service Area. 

You can execute this option only among the same hardware platforms and 
firmware versions.

The Clear wireless client Table feature ensures that wireless clients associating with 
the AP are active. You should only clear the wireless client association table for 
diagnostic purposes, or if the AP has many wireless client associations that are no 
longer in use. 

To clear wireless clients associated with an AP, do the following:

1 Select Special Functions from the Main Menu.

2 Select Clear wireless client Table. 

The AP removes the wireless clients associated with it. Wireless Clients cleared 
from an AP attempt to reassociate with the AP or another nearby AP.

The AP keeps an event log based on settings for logging options. This allows the 
administrator to log important events and keeps the log concise through the 
128-entry circular buffer. To set even logging options, do the following:

1 Select Set Event Logging Configuration from the Main Menu, which generates the 

Event Logging Configuration window.

2 Set Any Event Logging to Enabled to log all events. 

3 Disable events that do not require logging when Any Event Logging is disabled.