3com WL-463 Manual De Usuario
49
WPA C
ONFIGURATION
FOR
W
INDOWS
XP
The following table shows how to configure the access point to support the various
authentication and encryption options available for Windows XP Wireless Zero
Configuration.
authentication and encryption options available for Windows XP Wireless Zero
Configuration.
The following notes apply to configuring the access point for WPA under Windows
XP:
XP:
o
A WPA-capable wireless network interface card is required.
o
The Windows XP Support Patch for Wireless Protected Access, which you can
download from the Microsoft Web site, is required.
download from the Microsoft Web site, is required.
o
To allow WEP clients, clear the WPA Configuration Required check box and enter
an appropriate WEP key.
an appropriate WEP key.
o
For all WPA configurations, 802.1x must be enabled on the Authentication page.
Windows XP Wireless Zero
Configuration
Access Points 8200/8250/8500/8700/8750
Authentication
Encryption
Authentication
Encryption
Other
Open
Disabled
Open System
Disable
WEP
Open System
Enable
Enter static keys under
WEP Configuration
Shared
Disabled
Not available
WEP
Shared Key
Enable
Enter static keys under
WEP Configuration
WPA
AES
Not available on 8200
TKIP
Open System
Enable
WPA Configuration:
Required
Multicast Cipher Mode:
Multicast Cipher Mode:
TKIP
WPA Key Management:
WPA Key Management:
WPA 802.1x
WEP
Open System
Enable
WPA Configuration:
Required
Multicast Cipher Mode:
Multicast Cipher Mode:
WEP
WPA Key Management:
WPA Key Management:
WPA 802.1x