RAD Data comm Modular Access Device with Integrated Router Manual De Usuario
FCD-IPM Installation and Operation Manual
Chapter 5 Setup Menu
WAN Economy Menu
5-91
You need to configure:
• Start Connection
• Terminate Connection.
• Start Connection
• Terminate Connection.
Table 5-32. Connection On Demand Parameters
Parameters Possible
Values
Description
Start Connection
Upon Power Up
Any Frame to
Forward
Specific Frame to
Forward
Never
Start Connection is used to determine under which conditions is a
line established. To use this function, the line must not be
line established. To use this function, the line must not be
designated as answer only. After a physical connection is made,
data is transferred.
The line is established when the unit is turned on. Upon Power Up
The line is established when the unit is turned on. Upon Power Up
is recommended for leased lines only
The line is established when any frame that is directed to the link
arrives
The line is established only when specific types of frames directed
The line is established when any frame that is directed to the link
arrives
The line is established only when specific types of frames directed
to the link arrive. To determine which frames establish a line, filters
are used to specify the type of frame.
Any number of filters can be used. Filters work as a Boolean "OR";
Any number of filters can be used. Filters work as a Boolean "OR";
by specifying a filter for frame type A and filter for frame type B,
you establish a line for Frame type A or Frame type B.
Choosing this option automatically opens the Advanced Filter
Choosing this option automatically opens the Advanced Filter
menu, with Connect Operation selected
The line is permanently cutoff. In this case, you manually decide
when to activate a line.
The line is permanently cutoff. In this case, you manually decide
when to activate a line.
Terminate Connection
Never
No Frame to
Forward
Upon Time Out
No Specific Frame
to Forward
Terminate Connection is used to determine under which conditions
does a link terminates. Termination takes place only after a physical
connection is made.
The line is never terminated. Never is usually used when Upon
The line is never terminated. Never is usually used when Upon
Power Up
is used
The line is terminated after a specified time passes without a frame
passing through the line. You specify the time in which a frame
passing through the line. You specify the time in which a frame
must pass. The default is 60 seconds
The line is terminated after a fixed period of time regardless of the
traffic. The default is 60 seconds
The line is terminated if traffic of a specific type of frame falls below
The line is terminated after a fixed period of time regardless of the
traffic. The default is 60 seconds
The line is terminated if traffic of a specific type of frame falls below
a certain rate over a period of time. You determine the number of
frames and the time period in which they must pass. Using filters,
you specify which type of frames are counted. If frames other than
you specify which type of frames are counted. If frames other than
those specified pass through, they are not counted.
Choosing this option automatically opens the Advanced Filter menu