3com 3C840 Guía Del Usuario
4-8
C
HAPTER
4: C
ONFIGURING
IP R
OUTING
Configure the
Remote Site IP
Network Information
The following steps illustrate how you configure the remote site IP
network information.
network information.
1 Complete the following entries:
Local WAN IP Address:
■
If you were provided a single IP address, select Specified and enter
that address.
that address.
■
If you are using PPP to dynamically assign an address, select Dynamic,
and the remote site on the WAN will assign a local WAN IP address to
the WAN port of your OfficeConnect Remote 840.
and the remote site on the WAN will assign a local WAN IP address to
the WAN port of your OfficeConnect Remote 840.
■
Otherwise, select Unnumbered, and there will be no IP address
assigned to the local WAN interface for this VC.
assigned to the local WAN interface for this VC.
840ug.book Page 8 Friday, July 7, 2000 2:23 PM