3com 3C840 Guía Del Usuario
Bridge Firewall
5-7
the routed protocols configured by the profile (i.e., IP and/or IPX) will be
sent using the appropriate bridged encapsulation. If the configured
Network Service is PPP, the packets will be encapsulated in BRCP.
sent using the appropriate bridged encapsulation. If the configured
Network Service is PPP, the packets will be encapsulated in BRCP.
MAC-Encapsulated Routing is configured on the Remote Sites General
screen.
screen.
To access the Remote Sites General screen:
1 Go to the OfficeConnect Remote 840 home page and select
Configuration > Remote Sites (WAN).
2 Select a defined remote site and click Modify. This will access the
Remote Sites General Modify screen, containing the following fields:
3 Check the Enable MAC Encapsulated Routing box to enable MAC
Encapsulated Routing for this remote site.
4 Click Modify to save the change.
Bridge Firewall
The OfficeConnect Remote 840 can be configured for simultaneous
bridging and routing. IP routing is configured if IP forwarding is enabled
(see
bridging and routing. IP routing is configured if IP forwarding is enabled
(see
in Chapter 4.)
840ug.book Page 7 Friday, July 7, 2000 2:23 PM