Cisco Systems 1240AG Manual De Usuario
2-13
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
OL-8371-05
Chapter 2 Installing the Access Point
Mounting Above a Suspended Ceiling
The bracket mounting clip requires the use of two mounting clip holes on the mounting plate (see
).
Figure 2-6
Mounting Plate Holes
Follow these steps to mount the access point above a suspended ceiling.
Step 1
Insert the bracket mounting clip’s tab into the large hole on the access point mounting plate.
Step 2
Place the clip over the T-bar box hanger and secure it to the access point mounting plate (see
with the 1/4-20 fastener (supplied with the T-bar hanger).
Figure 2-7
Access Point Mounting Plate
Note
The illustration shows the access point mounting plate mounted perpendicular to the T-bar box
hanger. You can also mount the bracket parallel to the T-bar box hanger.
hanger. You can also mount the bracket parallel to the T-bar box hanger.
1
Bracket mounting clip holes
135498