3com 980-000077/002 Manual De Usuario

Set up the ISDN numbers table to associate each remote unit name 
with an ISDN number and an IP address. Central site autocalls rely on 
each remote unit having a valid, unique IP address. Ensure that one is 
entered for each remote unit.

1 Enter 

 

 

 to display the ISDN Numbers screen.

2 Enter 

 to add a new entry to the numbers table. 

3 Type the name of the remote unit in the Name field.

4 Type the ISDN number of the remote unit the ISDN Number 1 field.

5 Type an IP address of 

 in the IP Address field if unnumbered 

links are to be used.

6 Type a subnet mask of 

 in the IP Mask field if unnumbered 

links are to be used. 

7 Type a number between 6 and 10 in the IP Hop Count field. 

Increasing this setting from the default may help to prevent routing 
problems, in some cases.

8 Press [Ctrl]+[E] to submit the new setting and then enter 

Set up the ISDN Autocall table to associate the remote unit IP address 
with the remote unit name in the central site unit’s ISDN IP Autocall 
table.

1 Enter 

 

 

 

 to display the ISDN IP Autocall Addresses 

screen.

2 Enter 

 to add a new entry to the Autocall table.

3 Type the IP address of the remote unit in the IP Address field.

4 Type the subnet mask of the remote network in the IP Mask field.

5 Type the name of the remote unit in the Remote Unit field. Ensure 

that the name is correctly typed because this field is case-sensitive.

Get_con.bk : ROUT_IP.FRM  Page 5  Friday, October 3, 1997  1:49 PM