3com 980-000077/002 Manual De Usuario

C

HAPTER

 3: R

OUTING

 IP

The central site unit can now have IP routing re-enabled.

1 Enter 

 

 

 to display the Router Options screen. 

2 Toggle the IP Routing field to 

ENABLED

 using the Spacebar.

3 Press [Ctrl]+[E] to submit the new setting and then enter 

Both of the units must be correctly configured and functioning as IP 
routers for the new configuration of the remote unit to be saved. 

1 Enter 

 to display the Remote Units screen on the central site unit. 

2 Select the remote unit entry and enter 

 to establish a remote 

management session with the remote unit.

■

If the units are successfully routing IP packets, then the Enter 
Password screen of the remote unit is displayed within 30 
seconds.

3 Enter 

 (in upper-case letters) to access the remote unit 

management screens.

4 Save the new configuration by entering 

1 Enter 

 to close the remote management session.

The Remote Units screen on the central site unit is displayed.

It is important to remember that a manual call is still running from 
the initial connection to the remote unit. The call must be cancelled 
manually.

1 Enter 

 

 

 to display the ISDN Numbers screen.

2 Select the entry for the remote site unit and enter 

 to cancel the 

call.

3 Enter 

 to save the new configuration.

Get_con.bk : ROUT_IP.FRM  Page 16  Friday, October 3, 1997  1:49 PM