3com 980-000077/002 Manual De Usuario
Configuring a Remote Unit from the Central Site
5-9
too. In a large network, there will be a large number of entries in the
tables.
tables.
1 Enter
CO
RO
NS
to view the entries in the Novell IPX SAP table.
2 Enter
CO
RO
NR
to view the entries in the Novell IPX RIP table.
If there are two or more servers listed in the Novell IPX SAP table but
only one is required, a specific server can be configured to respond to
Novell clients’ Get Nearest Server requests.
only one is required, a specific server can be configured to respond to
Novell clients’ Get Nearest Server requests.
1 Enter
CO
RO
NE
to display the IPX Nearest Server screen.
2 Enter
ADD
and type in the name of the specific Novell server. This
name must be exactly the same as that displayed in the SAP table.
Novell server names are case-sensitive.
Novell server names are case-sensitive.
3 Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
4 Enter
CO
RO
PA
to display the Router Options screen.
5 Move the cursor to the IPX Nearest Servers field and toggle the
setting to
INCLUSIVE_LIST
using the Spacebar.
6 Press [Ctrl]+[E] to submit the new setting and then enter
SAVE
No Specific Server for GNS Responses
If no specific server is required, the entry in the SAP table with the
lowest hop count is used.
lowest hop count is used.
1 Enter
CO
RO
NS
to display the Novell IPX SAP screen which shows the
number of hops to each server.
The hop count in the NRIP table is the same as the hop count in the
SAP table.
SAP table.
Configuring a Remote Unit from the Central Site
A unit at a remote site can be remotely configured for IPX and bridging.
The remote management and configuration capability allows the unit to
be configured from the central site, without the need for a technician to
travel to a remote site.
The remote management and configuration capability allows the unit to
be configured from the central site, without the need for a technician to
travel to a remote site.
It is good practise to have ensured that the remote unit was restored
to the factory default settings before being despatched to the
remote site.
to the factory default settings before being despatched to the
remote site.
Get_con.bk : IPX_ROUT.FRM Page 9 Friday, October 3, 1997 1:49 PM