Cisco Systems 78-13983-04 Manual De Usuario

To specify the total number of Real-Time Transport Protocol (RTP) header compression connections 
that can exist on an interface, use the ip rtp compression-connections interface configuration 
command. To restore the default value, use the no form of this command. 

ip rtp compression-connections number

16 connections

Interface configuration

The following example changes the number of RTP header compression connections supported to 150:

interface serial 0

 encapsulation ppp

 ip rtp header-compression

 ip rtp compression-connections 150

Number of RTP header compression connections the cache supports, in the 
range from 3 to 600. The default is 16 connections.

11.3

This command was introduced.

12.0(7)T

For PPP and High-Level Data Link Control (HDLC) encapsulation, the 
maximum number of connections increased from 256 to 1000. 

For Frame Relay encapsulation, the maximum number of connections 
increased to 256. The maximum value for Frame Relay is fixed, not 
configurable.

12.1(4)E

This command was supported on Cisco 7100 series routers.

12.2(8)MC2

The upper limit for the MWR 1900 is set at 600.

Enables RTP header compression.

Displays RTP header compression statistics.