Cisco Systems 78-13983-04 Manual De Usuario
5-12
Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter 5
Command Reference
ppp mux subframe length
ppp mux subframe length
To set the maximum length (in bytes) of the PPP subframes, use the ppp mux subframe length
command in interface configuration mode. To set the maximum length to the default, use the no form of
this command.
command in interface configuration mode. To set the maximum length to the default, use the no form of
this command.
ppp mux subframe length integer
no ppp mux subframe length
Syntax Description
Defaults
The default maximum length is 195.
Command Modes
Interface configuration
Command History
Usage Guidelines
To use this command, you must first enable PPP multiplexing/demultiplexing. The maximum length of
the subframe should be the maximum length of the superframe minus the length of the L2 header.
the subframe should be the maximum length of the superframe minus the length of the L2 header.
Examples
The following example sets the maximum subframe length to 20 bytes.
ppp mux subframe length 20
Related Commands
integer
The maximum number of bytes in any single subframe that is to be
multiplexed. Possible values are 1 through 512 bytes.
multiplexed. Possible values are 1 through 512 bytes.
Release
Modification
12.2(8)MC2
This command was introduced.
Command
Description
ppp mux
Enables PPP multiplexing/demultiplexing
ppp mux delay
Sets the maximum delay.
ppp mux frame
Sets the maximum length of the PPP superframe.
ppp mux pid
Sets the default PPP protocol ID.
ppp mux subframe count
Sets the maximum number of subframes in a superframe.
show ppp mux
Displays PPP mux counters for the specified multilink interface.