Cisco Systems 78-13983-04 Manual De Usuario
5-21
Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter 5
Command Reference
standalone
standalone
To specify that the MWR 1900 is being used in a stand-alone configuration (which impacts the relays
on the VWIC), use the standalone command. To use the MWR 1900 in a redundant configuration, use
the no form of this command.
on the VWIC), use the standalone command. To use the MWR 1900 in a redundant configuration, use
the no form of this command.
[no] standalone
Syntax Description
This command has no attributes.
Defaults
By default, the MWR 1900 is configured to be used in a redundant configuration (no standalone) and
the relays are open.
the relays are open.
Command Modes
Y-cable configuration
Command History
Usage Guidelines
Issuing the standalone command closes the relays on the VWICs installed in the MWR 1900.
Examples
The following example closes the relays so that the MWR 1900 can be used as a stand-alone device.
standalone
Related Commands
Release
Modification
12.2(8)MC2
This command was introduced.
Command
Description
mode y-cable
Invokes y-cable mode.
standby use-interface
Specifies the interfaces to be used for health and revertive interfaces.