Cisco Systems ASA 5500 Manual De Usuario

To cable 4GE SSM interfaces, perform the following steps for each port you want 
to connect to a network device: 

To connect an RJ-45 (Ethernet) interface to a network device, perform the 
following steps for each interface: 

Locate a yellow Ethernet cable from the accessory kit. 

Connect one end of the cable to an Ethernet port on the 4GE SSM as shown 
in 

. 

Connect the other end of the cable to your network device.

(Optional) If you want to use an SFP (fiber optic) port, install and cable the SFP 
modules as shown in 

: 

Insert and slide the SFP module into the SFP port until you hear a click. The 
click indicates that the SFP module is locked into the port.

 

Remove the optical port plugs from the installed SFP. 

Locate the LC connector (fiber optic cable) in the 4GE SSM accessory kit. 

Connect the LC connector to the SFP port.

RJ-45 (Ethernet) port 

143597