Cisco Systems ASA 5500 Manual De Usuario
3-5
Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
78-17611-01
Chapter 3 Installing Optional SSMs
Cisco 4GE SSM
SFP Module
The adaptive security appliance uses a field-replaceable SFP module to establish
Gigabit connections.
Gigabit connections.
Note
If you install an SFP module after the switch has powered on, you must reload the
adaptive security appliance to enable the SFP module.
adaptive security appliance to enable the SFP module.
lists the SFP modules that are supported by the adaptive security
appliance.
The 1000BASE-LX/LH and 1000BASE-SX SFP modules are used to establish
fiber-optic connections. Use fiber-optic cables with LC connectors to connect to
an SFP module. The SFP modules support 850 to 1550 nm nominal wavelengths.
The cables must not exceed the required cable length for reliable communications.
fiber-optic connections. Use fiber-optic cables with LC connectors to connect to
an SFP module. The SFP modules support 850 to 1550 nm nominal wavelengths.
The cables must not exceed the required cable length for reliable communications.
lists the cable length requirements.
Table 3-3
Cabling Requirements for Fiber-Optic SFP Modules
Table 3-2
Supported SFP Modules
SFP Module
Type of Connection
Cisco Part Number
1000BASE-LX/LH
Fiber-optic
GLC-LH-SM=
1000BASE-SX
Fiber-optic
GLC-SX-MM=
SFP Module
62.5/125 micron
Multimode 850
nm
Multimode 850
nm
Fiber
50/125 micron
Multimode 850
nm Fiber
Multimode 850
nm Fiber
62.5/125 micron
Multimode
1310 nm Fiber
Multimode
1310 nm Fiber
50/125 micron
Multimode
1310 nm Fiber
Multimode
1310 nm Fiber
9/125 micron
Single-mode
1310 nm Fiber
Single-mode
1310 nm Fiber
LX/LH
—
—
550 m at
500 Mhz-km
500 Mhz-km
550 m at
400 Mhz-km
400 Mhz-km
10 km
SX
275 m at
200 Mhz-km
200 Mhz-km
550 m at
500 Mhz-km
500 Mhz-km
—
—
—