Cisco Systems and the ASA Services Module Manual De Usuario
30-26
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 30 Configuring the ASA CX Module
Monitoring the ASA CX Module
To check the status of a module, enter one of the following commands:
Examples
The following is sample output from the show module command for an ASA with an ASA CX SSP
installed:
installed:
hostname# show module
Mod Card Type Model Serial No.
--- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-10 wi ASA5585-SSP-10 JAF1507AMKE
1 ASA 5585-X CX Security Services Processor-10 ASA5585-SSP-CX10 JAF1510BLSA
Mod MAC Address Range Hw Version Fw Version Sw Version
--- --------------------------------- ------------ ------------ ---------------
0 5475.d05b.1100 to 5475.d05b.110b 1.0 2.0(7)0 100.7(6)78
1 5475.d05b.2450 to 5475.d05b.245b 1.0 2.0(13)0 0.6.1
Mod SSM Application Name Status SSM Application Version
--- ------------------------------ ---------------- --------------------------
1 ASA CX Security Module Up 0.6.1
Mod Status Data Plane Status Compatibility
--- ------------------ --------------------- -------------
0 Up Sys Not Applicable
1 Up Up
Showing Module Statistics
To show module statistics, enter the following command:
Examples
The following is sample output from the show service-policy command showing the ASA CX policy
and the current statistics as well as the module status when the authentication proxy is disabled:
and the current statistics as well as the module status when the authentication proxy is disabled:
hostname# show service-policy cxsc
Global policy:
Service-policy: global_policy
Class-map: bypass
CXSC: card status Up, mode fail-open, auth-proxy disabled
packet input 2626422041, packet output 2626877967, drop 0, reset-drop 0, proxied 0
Command
Purpose
show module
Displays the status.
show module
{1 | cxsc} details
Displays additional status information. Specify 1 for a hardware module
and cxsc for a software module.
and cxsc for a software module.
show module cxsc
recover
Displays the network parameters for transferring a software module boot
image.
image.
Command
Purpose
show service-policy cxsc
Displays the ASA CX statistics and status per service policy.