Renesas 70 Manual De Usuario

   

- 132 - 

Here you edit makefile the configurator generated, and set compilation options, libraries, and so on. The proce-
dure for setting them is given below. 

You define command options of the C compiler in "CFLAGS". Be sure to define the "-c" option. 

You define command options of the assembler in "ASFLAGS". 

You define command options of the linker in "LDFLAGS". There are no particular options you need to 
specify. 

You define libraries in "LIBS". 

The configurator picks up necessary libraries from the configuration file and from the current directory, 
and defines them in 'LIBS". Either add or delete libraries when necessary. 

 

If you create the own makefile for MR308 system, be sure to describe the following 4 items in the makefile. 

you must specify libraries mr308.lib and c308mr.lib. 

Make sure to specify assemble option "-F" when assembling the source file, described in the assemble 
language, which issues the service call. 

Before executing a link, make sure to execute the following two processes, in the order as are listed. 

1. mr308tbl 

2. as308 mrtable.a30 

MR308 comes equipped with the mr308tbl utility. Execute it in the directory where Configurator 
(cfg308) executes. If that is not the same directory where the service call file (XXX.mrc) and the r30 
file are output by C Compiler or Assembler, you need to specify the directory at parameters of 
mr308tbl as following. . 

 Ex) 

mr308tbl 

outputdir 

 

If you use Service call Issue Function on PD308, you need to add $(LIB308) at parameter of mr308tbl. 

Once mr308tbl is executed, the mrtable.a30 file will be created. After these two processes are com-
pleted, execute the link including the mrtable.r30 file.