Lantronix 1-T2 Manual De Usuario
Getting Started
Remote Console Logins
3 - 7
3.4 Remote Console Logins
The MSS enables a TCP/IP user to conÞgure the server via a single Telnet
connection to the remote console port, designated as port 7000. Connections
to the console port cannot be disabled. This ensures that administrators will
always be able to log into the port.
connection to the remote console port, designated as port 7000. Connections
to the console port cannot be disabled. This ensures that administrators will
always be able to log into the port.
To connect to the remote console port, use the Telnet command followed by
the MSSÕs IP address and the remote console port number.
the MSSÕs IP address and the remote console port number.
Figure 3-8:
Connecting to the Console Port
3.5 Starting Outbound Connections
When logged into the MSS, users can make basic outgoing connections using
the methods on the following page. See the MSS Reference Manual on CD-
ROM for more information about incoming and outgoing connections.
the methods on the following page. See the MSS Reference Manual on CD-
ROM for more information about incoming and outgoing connections.
NOTE:
Outgoing connections cannot be made via the same method as
the incoming connection was made. In other words, if a user
Telnets into the MSS, he cannot Telnet back out.
the incoming connection was made. In other words, if a user
Telnets into the MSS, he cannot Telnet back out.
3.5.1 Telnet
To start an outgoing Telnet session, type ÒTelnetÓ at the Local prompt,
followed by either the hostÕs name or its numeric IP address.
followed by either the hostÕs name or its numeric IP address.
Figure 3-9:
Telnet Connection
% telnet 192.0.1.88 7000
Trying 192.0.1.88
Connected to 192.0.1.88
Escape character is ‘^]’
# access (not echoed)
Lantronix MSS Version n.n/n (yymmdd)
Type Help at the ‘Local>’ prompt for assistance.
Enter Username> jerry
Local> TELNET 192.0.1.66