Printronix Integrated Network Interface Card Manual De Usuario
Speed Setting for 10/100Base-T
19
6.
NIC in Auto mode in 10mbps HD environment (determined
using 10hd hub)
using 10hd hub)
Use auto-negotiation to the highest common local and remote
capability, i.e. 100HD in this case.
capability, i.e. 100HD in this case.
PORs to 10HD. Resets to 10HD. Reconnection at switch
maintains 10HD.
maintains 10HD.
NOTE: With parallel detection, only speed can be determined. The
duplex mode sets to half duplex.
Conventions Used In This Manual
All uppercase print indicates control panel keys.
Example: Press the CLEAR key, then press the ONLINE key.
Example: Press the CLEAR key, then press the ONLINE key.
Quotation marks (“ “) indicate messages on the Liquid Crystal
Display (LCD).
Example: Press the ONLINE key. “OFFLINE” appears on the LCD.
Display (LCD).
Example: Press the ONLINE key. “OFFLINE” appears on the LCD.
Command syntax and examples are formatted as follows:
•
The Courier font in boldface indicates commands that you
type. For example:
type. For example:
At the prompt, type:
ping ftp.CompanyWebsite.com
•
Regular Courier font indicates references to command syntax
and output. For example:
and output. For example:
The ftp.CompanyWebsite.com site is working properly.
•
Variable values are shown in
italics in command syntax, output,
and in text. For example:
ping ipname
The
ipname is working properly.
Conventions Used In This Manual