IBM 100/10 Manual De Usuario
TPC-642 User’s Manual
116
Appendix B Installing PC/104-Plus Modules
B.1 Installing PC/104-Plus Modules
The PCM-9575's PC/104 connectors give you the flexibility to attach PC/
104+ modules.
Installing these modules on the PCM-9575 is quick and simple. The fol-
lowing steps show to mount the PC/104+ modules:
104+ modules.
Installing these modules on the PCM-9575 is quick and simple. The fol-
lowing steps show to mount the PC/104+ modules:
1.
Remove the PCM-9575 from your system, paying particular atten-
tion to the safety instructions already mentioned above.
tion to the safety instructions already mentioned above.
2.
Make any jumper or link changes required to the CPU card now.
Once the PC/104+ module is mounted, you may have difficulty in
accessing these.
Once the PC/104+ module is mounted, you may have difficulty in
accessing these.
3.
Normal PC/104+ modules have male connectors and mount
directly onto the main card. (Refer to the diagram on the following
page.)
directly onto the main card. (Refer to the diagram on the following
page.)
4.
Mount the PC/104+ module onto the CPU card by pressing the
module firmly but carefully onto the mounting connectors.
module firmly but carefully onto the mounting connectors.
5.
Secure the PC/104+ module onto the CPU card using the four
mounting spacers and screws.
mounting spacers and screws.