DELL D13M Manual De Usuario
Installing the Input/Output (I/O) Panel
1.
Insert the I/O panel into the slot on the chassis front.
2. Slide the I/O panel towards the right of the computer to secure to the chassis.
3. Tighten the screw to secure the I/O panel to the chassis.
4. Thread the I/O panel, data cable and USB data cable into the chassis clip.
5. Connect the I/O panel, data cable and USB data cable to the system board.
6. Install :
3. Tighten the screw to secure the I/O panel to the chassis.
4. Thread the I/O panel, data cable and USB data cable into the chassis clip.
5. Connect the I/O panel, data cable and USB data cable to the system board.
6. Install :
a. front bezel
b. cover
b. cover
7. Follow the procedures in After Working Inside Your Computer.
Removing the System Board
1.
Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. cover
b. memory
c. expansion card(s)
d. heat-sink assembly
e. processor
b. memory
c. expansion card(s)
d. heat-sink assembly
e. processor
3. Disconnect all the cables from the system board.
4. Remove the screws that secure the system board to the computer and slide the system board
4. Remove the screws that secure the system board to the computer and slide the system board
towards the front of the computer.
28