Global Technology Associates GBWA200501-01 Manual De Usuario

GB-Ware Firewall Product Guide

14

The serial version of the GB-Ware runtime installs factory default 
settings; a serial or temporary peer Ethernet connection can be used 
to  change  these  settings.  If  you  prefer  to  perform  initial  firewall 
configuration over the web or with GBAdmin, choose this option.

The selection list also includes the Erase Disk function. This allows the user 
to clear all the disk data from the selected disk.

Using the 

 choice will erase a drive’s contents. Only 

use it if you are sure you want to destroy all data on the destination 
disk.

Selecting an Installation Disk
The software will ask you to select a drive that should receive the GB-Ware 
installation. From the list of available devices, select the Compact Flash 
card or hard drive device where you wish to install GB-Ware.

The Compact Flash card, once mounted using an adapter or USB 
card reader, is considered a disk drive by the system.

Press the 

 to cycle through available options, or use the 

 key 

to display a list of devices and the 

keys to move through the list.

da

 indicates a direct access USB device. A USB Compact Flash 

card reader/writer containing a Compact Flash card might be designated 

da0

. Any additional USB devices recognized by the installation will be 

designated as 

da1

, 

da2

, etc. 

ad

 identifies an IDE device. Any recognized IDE device 

installed on the primary IDE controller master will be designated 

ad0

, 

whether it’s a hard drive or a Compact Flash card mounted in a Compact 
Flash IDE adapter. Any additional recognized IDE device will be designated 
by the IDE controller slot it occupies; if you have not disconnected your 
firewall’s hard drive, and you put a Compact Flash card and IDE adapter on 
the primary IDE controller slave port, the hard drive will be recognized as 

ad0

, while the Compact Flash card will be designated 

ad1

.