Global Technology Associates GBWA200501-01 Manual De Usuario

GB-Ware Firewall Product Guide

34

If you cancel the Setup Wizard, go to Basic Configuration then Features 
to enter your serial number and activation code. Next, enter your 
initial  configuration  information  in  Basic Configuration  then  Network 
Information. Your firewall will not be functional until these steps are 
performed, either by hand or Setup Wizard.

3. Host Name 

Enter the host name of the firewall. The host name should be a 
fully-qualified domain name registered with your domain name 
server. Select 

.

4. Contact Information 

Fill in the contact information for your firewall. Select 

.

5. Serial Number and Activation 

Enter your firewall’s serial number and activation code, which are 
retrievable from the GTA Support web site (https://gta.com/support/
center/login/) under 

after registering your product. 

Select 

.

6a. PPP/PPPoE/PPTP 

Select

 if you will not be using PPP on the external network inter-

face, and go to step 6b. To use PPP/PPPoE/PPTP, toggle the field 
value to 

 and click 

, then go to PPP Configuration.

6b. DHCP 

If your system will not utilize DHCP on the external network inter-
face, select 

 and go to step 6c. If your system will use DHCP 

on the external network interface, select 

 and skip to step 7.  

(Typically, cable modem and xDSL sites use DHCP.)