Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Gateway
  4. E-824R
  5. Manual De Usuario

Gateway E-824R Manual De Usuario

Descargar
Página de 116
Using the Configuration page
www.gateway.com
59
3
To change the IP address from a static address to a dynamic address, click 
the box next to DHCP.
To set the network configuration:
 
1
To change the values of the subnet mask, gateway, Simple Network 
Management Protocol (SNMP) server, or the time server, type in the new 
address, using the T
AB
 
key to move from box to box.
2
Click Submit.
Setting security options
When you enable the security option, users must enter a password to access 
the autoloader's front panel functionality (see 
). A password allows either administrator-level access or 
operator-level access (see 
).
To set security:
 
1
From any page, click Configuration. The Configuration screen opens.
2
Click Security on the left side of the screen. The System Security section 
of the screen displays.
3
To enable front panel security, click the box next to Front Panel Security 
Enabled.
If the box is blank, the security option for the front LCD panel is not 
enabled.
4
Click Submit.
To reset the front panel password:
 
1
From any page, click Configuration. The Configuration screen opens.
2
Click Security on the left side of the screen. The System Security section 
of the screen displays.
3
Click the box next to Reset Front Panel Password. A check mark appears.
4
Click Submit.
To set User Administration:
 
1
From any page, click Configuration, then press E
NTER
. The Configuration 
submenu opens.
2
Click Security on the left side of the screen. The System Security section 
of the screen displays.