Siemens 200 Manual De Usuario

8

Gigaset 200, GBR, A31008-G200-B101-1-7619

VORBEREI.FM

28.09.01

Step 3: Place the handset on 
the base unit

In order to make calls, you need to register your hand-
set with the base unit (to make it known to it). The fol-
lowing text appears on the display: "SEARCH BASE". 
Put the handset on the base unit with the display 
visible

. The following text appears on the display: 

"REGISTER HS". 

It takes around a minute for the handset to be 
registered with the base unit. The idle display (battery 
symbol) appears instead of the display "REGISTER 
HS".

Step 4: Charge the batteries

Leave the handset on the base unit for around five 
hours in order to charge the batteries. A charging 
indicator on the handset shows that the batteries are 
being charged:

Your phone is now ready for operation; you can start 
calling.

Note on the battery

H

Batteries empty 
(symbol flashes)

G

Batteries 

1

/

3

 

charged

F

Batteries 

2

/

3

 charged

E

Batteries full

8

●

After the batteries are charged for the first 
time, you can put the handset back on the 
base unit again after each call. Charging is 
controlled electronically. This ensures that 
the batteries are charged optimally and 
economically.

●

The batteries become warm during charg-
ing; this is normal and not dangerous.

●

The charging status of the batteries is only 
displayed correctly after an uninterrupted 
charging/discharging process. You should 
therefore avoid opening the battery 
compartment unnecessarily.

C

5 h